- Lock and unlock with special key - Lightweight aluminum key is easy to carry - Anti-rust CrMo axle, stainless steel springs
DT Pro Head nipples are designed for short spokes with a large angle of deflexion such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to a homogeneous power transmission. The special shape of the head prevents the nipple of tilting in the rim base, which is a great advantage for wheel building. They are available with or without the patented DT Pro Lock locking system. Note: brass nipples are not approved for children’s products in the USA.
$23.10 - $30.00
DT Swiss tubeless-ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type setups. - Durable adhesive tape works as a rim tape and airseal
$23.00 - $30.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
$20.00 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
DT-Swiss Center Lock Adaptor. Allows 6-bolt rotors to be used on Center Lock hubs. - Rotor thickness between 1.8mm and 2.2mm - Easy assembly and only 29g - Made in Switzerland by DT Swiss - 230mm version accepts all rotors up to 203mm diameter - 160mm version accepts all rotors up to 160mm diameter
Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.
- Extra security against theft - 5mm hex CrMo axle
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Stainless spoke nipple flat washers from Whisky. - .3mm Thickness
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately
After designing the CLX 50s, we realized that an affordable, race-worthy carbon wheelset was nowhere to be found, until the CL 50 Disc was developed, that is. We paired our quiver-killing CLX 50 Disc rim with DT Swiss Competition round spokes, our Aero Flange Disc hubs with DT Swiss 350 internals, and steel bearings to deliver you an exceptional wheelset at a more than accessible price. Why disc you ask? With our disc-specific rims, you not only ditch the brake track, but you get a stronger, more impact-resistant rim. This comes at the hands of a disc-specific carbon layup that optimizes stiffness and keeps weight as close to its rim-brake brethren as possible. And all the while, you get incredible brake modulation and power in all conditions. Sharing rims with the CLX 50s, the CL 50s feature many of the benefits as their higher-end siblings. Even though the CL 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CL 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. Now it was time for final testing validation. The result? A 50mm-deep, 1515-gram clincher wheelset that's race-ready and wallet-friendly. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval steel quick-releases, Roval tubeless plugs and valves, Front quick-release, 12mm endcaps, Rear quick-release, 142x12 thru-axle endcaps - Front Hub: Roval AFD1, Center Lock, sealed cartridge bearings, quick-release or 12mm thru-axle end cap - Front Spoke Pattern: Two-cross/Radial (2:1) - Nipple Type: DT Swiss Pro LockBrass hexagonal - Rear Hub: Roval AFD2, Center Lock, sealed cartridge bearings, DT Swiss 350 internals, 11-speed, quick-release or 142x12mm thru-axle end cap - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Rim Depth: 50mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss-Ready - Rim Width: 20.7mm internal, 29.4mm external - Spoke Count: 21 front, 24 rear - Spoke Type: DT Swiss Competition Race T-head - Total Wheelset Weight: 1,515g
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that's where the all-new CLX 50 comes in. When we set out to create the CLX 50, we had clear goals in mind, create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, while taking some aero guidance from the CLX 64, if we were going to create what we like to call "the unicorn wheel." Even though the CLX 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. After finding the optimized rim shape that supported our svelte weight requirements, we opted to lace the rims, via 16 DT Swiss Aerolite spokes, to our Aero Flange (AF) hub with the legendary CeramicSpeed bearings. And when it was time for final testing validation, we were left with a 50mm-deep, 1375-gram clincher wheelset that's not only 200 grams lighter than the competition's similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon Fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Front Hub: Roval AF1, CeramicSpeed bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 50mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal, 29.4mm external - Spoke Count: 16 - Spoke Pattern: Radial - Spoke Type: DT Swiss Aerolite T-head - Weight: 607g
- Road racing/training rim based on the Aerohead rim with a wider footprint that allows for a more aerodynamic rim/tire combination when paired with a 23c tire - Tire profile mimics the characteristics of a tubular - Hollow core aluminum with machined sidewalls for improved braking - O/C version: Off center design allows for dramatically improved spoke tension on a dished wheel, the A23 OC allows for a more aerodynamic rim/tire combination when paired with a 23c tire - US made A23 rims now feature a tubeless ready design. Combine that with the new 21mm wide Velotape kit and you have a fool-proof Road and Cyclocross tubeless tire setup
Previous page Page 2 of 2